54.6V 5A Smart Charger for 13S 48V Lithium Battery with LED Indicator & Fireproof Shell
Couldn't load pickup availability
Ready to work out of the box!
Includes all key accessories and simple setup instructions for quick start!
Share
Expected arrival within 12–15 days
Designed for 13S 48V Lithium-ion (Li-ion/LiPo) battery packs, this 54.6V 5A smart charger operates on universal AC 100V–240V (50/60Hz) input voltage with a high 5-amp fast-charging output current. Built with a heat-resistant, fireproof ABS+PC shell, it features an intelligent multi-protection system that guards against over-current, over-voltage, short-circuiting, reverse polarity, and over-charging. The unit includes a dual-color LED status indicator light (solid Red for active charging and solid Green for fully charged status) and comes equipped with a detachable, replaceable AC power cord plug.
-
Compatibility: 13S 48V Lithium-ion (Li-ion/LiPo) Batteries
-
Output Voltage: 54.6V
-
Output Current: 5A Fast Charging
-
Input Voltage: AC 100V–240V, 50/60Hz
-
Body Material: Fireproof ABS+PC Shell
-
Protection: Over-Current, Over-Voltage, Short-Circuit, Auto Cut-off
-
Indicator: LED Light (Red = Charging, Green = Full/Standby)
-
Plug Type: Replaceable AC Power Cable
Customer Reviews
Excellent charger, very well made. The installation of the components is of high quality, clean, with mosfets mounted on the case using thermal paste.
There are adjustments on the main board for maximum voltage, maximum current, and a third parameter - it seems to be the threshold for switching to trickle charging, but I haven't tested it. I marked with a marker where I is and where U is. The current can be adjusted down to 3.5A, but I needed to set it to 3A - I had to re-solder resistor R58 in the current limiter divider from 1k5 to 1k0 - now the current can be adjusted from 2.5A to 4.5A. But it can also be increased. The circuit will most likely handle 7 or more amperes - we need to check what kind of MOSFETs are used there.
On the measurement board, I, U, and t seem to be adjustable. I calibrated the current and voltage using instruments, but in principle, everything was set up correctly with a slight margin of error on the plus side.
Excellent charger, I got it with an XT60 connector, the matching connector part was included, and I soldered the plug from my scooter to it without any problems. The cooler turned out to be a bit noisy, but since the charger is barely warm, I think the cooler can be connected through a resistor to make it quieter and set it to blow air.
I RECEIVED THE CHARGER. RESPECT AND THANKS TO THE SELLER.
The charger is of high quality. It supports 5A. For better cooling, I turned the cooler around. It was facing outwards and was heating up. I turned it around to face inwards, and the temperature dropped significantly.
Product features same as advertised. well built with robust metal casing, has builtin fan and external fuse. comes with thick and reasonably long power and charging cable. also included 2 extra fuses and an extrs charging connector adapter. i'm very satisfied.